|
|
|
Soil pH Meter Kit - Hanna
The 50-HI99121
kit has been designed to address the question of correct and rapid measurement
of pH directly in soil. Every item in this kit has been made to facilitate
measurements in the field without compromising accuracy. 50-HI99121
can test the pH of soil directly or after preparation of a diluted sample. In
order to measure the pH directly, the kit includes a plastic auger to perforate
the ground. The pH and temperature can be directly tested with the 4-in-1 conic
shaped electrode with even a slightly moist soil. For higher degrees of
accuracy, or for stony ground where the electrode may be damaged, use the
specially made 50-HI7051
test solution. This solution is included in the package to help you measure the
pH more precisely by diluting a sample of the soil in it.
The kit naturally includes a pH meter. However,
in order to facilitate fast and reliable measurements, the supplied pH meter is 50-HI991000
complete with 50-HI1292D
electrode, pH 4 and pH 7 calibration sachets, beaker, auger and a practical and
rigid carrying case. 50-HI991000
is waterproof and sophisticated yet engineered for simplicity.
The 4-in-1 pH electrode, 50-HI1292D,
has been designed for direct soil measurement. It has a conic, rugged tip and
can be directly inserted in moist or soft soil. The electrode incorporates a
temperature sensor right near the tip to enable it to measure and compensate for
the temperature quickly. It also houses a miniaturized amplifier to boost the
signal and provide greater stability in spot measurements. The dual-level LCD
shows the pH value from 0 to 14 in hundredths of units. It also displays the
temperature on the secondary level at the same time. With a menu-driven custom
microprocessor, the user is helped with clear prompts during operation and
calibration. The batteries provide up to 1000 hours of continuous operation and
indicate the battery level at any time. Calibration is completely automatic and
the meter recognizes the buffers too. Any value set by the user as well as the
calibration data are retained even during battery replacement. 50-HI991000
is ergonomic and has been made for single-handed use.
Together with the meter you will also receive a
handy booklet which explains how pH should be measured as well as general
information about the correct limits in greenhouses, nurseries, fertilizer
solutions as well as fruit and vegetable.
50-HI99121
is supplied complete with 50-HI991000
portable waterproof pH meter, 50-HI1292D
pH electrode, ground auger, beaker, 50-HI7051M soil preparation
solution, pH 4 & 7 cal. solutions, rugged carrying case.
| Specifications: |
50-HI99121 |
| Range |
0.00 to 14.00 pH; 0.0 to 60.0°C |
| Resolution |
0.01 pH; 0.1°C |
| Accuracy(@20°C/68°F) |
±0.02 pH; ±0.5°C |
| Typical EMC
Deviation |
±0.3 pH; ±1°C |
|
pH Calibration
|
Automatic 1 or 2
points with 2 sets of 3 memorized buffers
(4.01/7.01/10.01 or 4.01/6.86/9.18) |
| Temp Compensation |
Automatic from 0 to 60°C |
| Electrode |
50-HI1292D with temp
sensor, amplifier, DIN connector and 1 m (3.3’) cable (included) |
| Battery Type/Life |
4x1.5V AAA/1000 hours approx.
of continuous use |
| Environment |
0 to 50°C (32 to 122°F);
100% RH |
| Dimensions |
150x80x28 mm (5.9x3.1x1.1”) |
| Weight |
210 g (7.5 oz.) |
ScienceLab offers Soil pH Meter Kit - Hanna and many other laboratory products and chemicals for all of your research project needs. Whether you work in a lab setting or perform testing in the field, we have the products you need, from pH Meters - Portable, glassware, chemicals, or testing equipment. We care about our customers' needs, if you are unable to find the scientific product your looking for then please contact us for assistance at 800-901-7247.
|
|
Featured Products
|
|
