|
|
|
Electronic Design Line Modular Units
EDL Power Board (10-1207-1)
The base of all the EDL units is electrical power. You can supply your own or use this convenient D.C. power unit for supplying 3, 6, or 9 volt D.C. current.
More Detail
|
|
|
|
EDL Motor and Reversible Switch (10-1207-3)
This 3 volt D.C. motor can be used with many mechanical-electrical experiments or used in conjunction with the reversible switch. Thrown one way the motor will run clockwise and thrown the other...
More Detail
|
|
|
|
EDL Heat and Magnetic Switch (10-1207-4)
The thermostat on this unit can be used to either open or close a circuit by heat. The magnetic switch has normally open contacts that close when a magnet is brought near.
More Detail
|
|
|
|
EDL Transformer (10-1207-5)
This mounted transformer is designed to demonstrate how voltage can be either stepped up or down. Input voltage must be either A.C. or pulsating D.C. current. You can use your own power supply or...
More Detail
|
|
|
|
EDL Electromagnetic Solenoid and Pulsator (10-1207-6)
This Electromagnetic Solenoid and Pulsator illustrate electromagnetism and polarity. Connect the spring arm and contacts for constructing a working relay or use this item to pulsate D.C. current...
More Detail
|
|
|
|
EDL Resistance Set (10-1207-7)
Use an ohmmeter to demonstrate the difference in resistance or to teach the standard color code of registers. Hook up the potentiometer for a variable resistance ranging from 0 to 150,000 ohms....
More Detail
|
|
|
|
EDL Buzzer and Contact Switch (10-1207-8)
This buzzer and contact switch can be used for many experiments requiring a 6 volt buzzer or a momentary closed switch. By supplying power you could hook the key switch to the buzzer to create a...
More Detail
|
|
|
|
EDL Connector Wires (10-1207-9)
These insulated wires with stripped ends are perfect for all EDL experiments. Wires are 18 gauge solid copper, 12" long. Sold in packages of 12.
More Detail
|
|
|
|
EDL Explorer Pack Kit (10-1207-10)
This Explorer pack kit Contains 1 each of: Power Board, Lamp and Switch, Buzzer and Contact Switch, and Resistance Set. This unit also contains 1 pkg. of EDL Connector Wires and instruction...
More Detail
|
|
|
|
EDL Designer Pack Kit (10-1207-11)
This electronic Designer pack kit Contains 1 each of: Power Board, Lamp and Switch, Transformer, Electronic Solenoid and Pulsator, Heat and Magnetic Switch plus 12 connector wires. Just a few of...
More Detail
|
|
|
|
EDL Engineering Pack Kit (10-1207-12)
This electronic engineering pack kit contains both the EDL Explorer Pack and the EDL Designer Pack plus an advanced work booklet.
More Detail
|
|
|
|
EDL Solar Cell (10-1207-13)
This solar cell can be used independently to create .5 volt 300 mA or with other solar cells to produce greater voltage. This solar cell will run the motor on the EDL Motor and Reversible Switch....
More Detail
|
|
|
|
EDL Demonstration Fuse (10-1207-14)
Simple and visual, this EDL consists of two clips in which a piece of steel wool is stretched. When excess voltage is applied to the fahnstock clips the steel wool instantly burns up thus opening...
More Detail
|
|
|
|
EDL Galvanometer (10-1207-15)
Many test circuits need some sort of visual indicator. This meter is built from a high quality, liquid dampening compass. This gives you a smooth steady reading that is easy to compare. Quick...
More Detail
|
|
|
|
EDL Multi-Push Button Switch (10-1207-16)
Five normally open push button switches are mounted on this new EDL module board. Several projects can be controlled at the same time with this one unit. Each switch has its own fahnstock...
More Detail
|
|
|
|
EDL Digit Display (10-1207-17)
Bring a little high tech to your project with this large LED number display. Capable of displaying numerals 0 to 9 using only two volts DC. Each leg of the display has its own fahnstock clips for...
More Detail
|
|
|
|
|
|
Featured Products
|
|
