PDF not cached, trying to generate... 0 1 0 1 1 0 G
63148-62-9 or 9006-65-9JT6484500TSCA 8(b) inventory: Listed as Dimethyl Silicones and Siloxanes (CAS no. 63148-62-9)Dow Corning 200 fluid, 500 cstNot available.Silicone Fluid 500 cst; DC Silicone fluid 200, 500 cst; Polydimethylsiloxane, Trimethylsiloxy-TerminatedNot available.Not available.Not available.
NameCAS #% by Weight
Polydimethylsiloxane63148-62-9 or 9006-65-9>60
Not applicable.
Slightly hazardous in case of skin contact (irritant), of eye contact (irritant), of ingestion. Non-hazardous in case of inhalation.CARCINOGENIC EFFECTS: Not available. MUTAGENIC EFFECTS: Not available. TERATOGENIC EFFECTS: Not available. DEVELOPMENTAL TOXICITY: Not available. Repeated or prolonged exposure is not known to aggravate medical condition.
Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention if irritation occurs.Wash with soap and water. Cover the irritated skin with an emollient. Get medical attention if irritation develops.Not available.If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention if symptoms appear.Not available.Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Loosen tight clothing such as a collar, tie, belt or waistband. Get medical attention if symptoms appear.Not available.
May be combustible at high temperature.Not available.CLOSED CUP: >101.11°C (214°F).Not available.Not available.Slightly flammable to flammable in presence of open flames and sparks, of heat.Risks of explosion of the product in presence of mechanical impact: Not available. Risks of explosion of the product in presence of static discharge: Not available.SMALL FIRE: Use DRY chemical powder. LARGE FIRE: Use water spray, fog or foam. Do not use water jet.Not available.Not available.
Absorb with an inert material and put the spilled material in an appropriate waste disposal.Absorb with an inert material and put the spilled material in an appropriate waste disposal. Finish cleaning by spreading water on the contaminated surface and allow to evacuate through the sanitary system.
Keep away from heat. Keep away from sources of ignition. Ground all equipment containing material. Do not ingest. Do not breathe gas/fumes/ vapor/spray. If ingested, seek medical advice immediately and show the container or the label. Keep away from incompatibles such as oxidizing agents.Keep container tightly closed. Keep container in a cool, well-ventilated area.
Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapors below their respective threshold limit value. Ensure that eyewash stations and safety showers are proximal to the work-station location.Safety glasses. Lab coat. Gloves. No respiratory protection should be needed. Please note that these precautions are for room temperature handling without aerosol/spray application. Use at elevated temperature or aerosol/spray applications may require added precautions. For further information regarding aerosol inhalation toxicity, please refer to the guidance document regarding the use of silicone-based materials in aerosol applications that has been developed by the silicone industry (www.sehsc.com). Coments: When heated to temperatures above 150 deg. C in the presence of air, this product can form formaldehyde vapors. Formaldehyde is a potenetial cancer hazard, a known skin and respiratory sensitizer, and an irritant to the eyes, nose, throat, skin, and digestive system. Safe handling conditions may be maintained by keeping vapor concentrations within the OSHA Permissible Limit for formaldehyde.Splash goggles. Full suit. Boots. Gloves. No respiratory protection should be needed. Please note that these precautions are for room temperature handling without aerosol/spray application. Use at elevated temperature or aerosol/spray applications may require added precautions. For further information regarding aerosol inhalation toxicity, please refer to the guidance document regarding the use of silicone-based materials in aerosol applications that has been developed by the silicone industry (www.sehsc.com). Coments: When heated to temperatures above 150 deg. C in the presence of air, this product can form formaldehyde vapors. Formaldehyde is a potenetial cancer hazard, a known skin and respiratory sensitizer, and an irritant to the eyes, nose, throat, skin, and digestive system. Safe handling conditions may be maintained by keeping vapor concentrations within the OSHA Permissible Limit for formaldehyde.Not available.
Liquid.Odorless.Not available.Not available.Colorless.Not available.>65°C (149°F)Not available.Not available.0.97 (Water = 1)Not available.Not available.Not available.Not available.Not available.Not available.Not available.Not available.
The product is stable.Not available.Excess heat, incompatible materialsReactive with oxidizing agents.Not available.Not available.Not available.Will not occur.
Contact with skin. Eye contact.Acute oral toxicity (LD): >10000 mg/kg [Guinea pig].Not available.Slightly hazardous in case of skin contact (irritant), of ingestion. Non-hazardous in case of inhalation.Other Lethal Dose/Conc: LC [Rabbit] - Route: Inhalation; Dose: >978000 mg/kg/7.5HNot available.Acute Potential Health Effects: Skin: May cause skin irritation. However, no significant irritation is expected from a single short-term exposure. Eyes: Direct contact may cause irritation with temporary redness and discomfort. Inhalation: No significant effects expected from a single short-term exposure. Ingestion: Low ingestion hazard in normal use.
Not available.Not available.Possibly hazardous short term degradation products are not likely. However, long term degradation products may arise.Not available.Not available.
Waste must be disposed of in accordance with federal, state and local environmental control regulations.
Not a DOT controlled material (United States).Not applicable.Not applicable.
TSCA 8(b) inventory: Listed as Dimethyl Silicones and Siloxanes (CAS no. 63148-62-9) TSCA 8(a) PAIR: Listed as Dimethyl Silicones and Siloxanes (CAS no. 63148-62-9) TSCA 8(d) H and S data reporting: Listed as Dimethyl Silicones and Siloxanes (CAS no. 63148-62-9): Effective Date: 10/12/93; Sunset Date: 6/30/98Not available.Not controlled under WHMIS (Canada).This product is not classified according to the EU regulations. Not applicable.110g010Gloves. Lab coat. Safety glasses.
Not available.Not available.
 0 1 0 1 1 0 G
63148-62-9 or 9006-65-9JT6484500TSCA 8(b) inventory: Listed as Dimethyl Silicones and Siloxanes (CAS no. 63148-62-9)Dow Corning 200 fluid, 500 cstNot available.Silicone Fluid 500 cst; DC Silicone fluid 200, 500 cst; Polydimethylsiloxane, Trimethylsiloxy-TerminatedNot available.Not available.Not available.
NameCAS #% by Weight
Polydimethylsiloxane63148-62-9 or 9006-65-9>60
Not applicable.
Slightly hazardous in case of skin contact (irritant), of eye contact (irritant), of ingestion. Non-hazardous in case of inhalation.CARCINOGENIC EFFECTS: Not available. MUTAGENIC EFFECTS: Not available. TERATOGENIC EFFECTS: Not available. DEVELOPMENTAL TOXICITY: Not available. Repeated or prolonged exposure is not known to aggravate medical condition.
Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention if irritation occurs.Wash with soap and water. Cover the irritated skin with an emollient. Get medical attention if irritation develops.Not available.If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention if symptoms appear.Not available.Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Loosen tight clothing such as a collar, tie, belt or waistband. Get medical attention if symptoms appear.Not available.
May be combustible at high temperature.Not available.CLOSED CUP: >101.11°C (214°F).Not available.Not available.Slightly flammable to flammable in presence of open flames and sparks, of heat.Risks of explosion of the product in presence of mechanical impact: Not available. Risks of explosion of the product in presence of static discharge: Not available.SMALL FIRE: Use DRY chemical powder. LARGE FIRE: Use water spray, fog or foam. Do not use water jet.Not available.Not available.
Absorb with an inert material and put the spilled material in an appropriate waste disposal.Absorb with an inert material and put the spilled material in an appropriate waste disposal. Finish cleaning by spreading water on the contaminated surface and allow to evacuate through the sanitary system.
Keep away from heat. Keep away from sources of ignition. Ground all equipment containing material. Do not ingest. Do not breathe gas/fumes/ vapor/spray. If ingested, seek medical advice immediately and show the container or the label. Keep away from incompatibles such as oxidizing agents.Keep container tightly closed. Keep container in a cool, well-ventilated area.
Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapors below their respective threshold limit value. Ensure that eyewash stations and safety showers are proximal to the work-station location.Safety glasses. Lab coat. Gloves. No respiratory protection should be needed. Please note that these precautions are for room temperature handling without aerosol/spray application. Use at elevated temperature or aerosol/spray applications may require added precautions. For further information regarding aerosol inhalation toxicity, please refer to the guidance document regarding the use of silicone-based materials in aerosol applications that has been developed by the silicone industry (www.sehsc.com). Coments: When heated to temperatures above 150 deg. C in the presence of air, this product can form formaldehyde vapors. Formaldehyde is a potenetial cancer hazard, a known skin and respiratory sensitizer, and an irritant to the eyes, nose, throat, skin, and digestive system. Safe handling conditions may be maintained by keeping vapor concentrations within the OSHA Permissible Limit for formaldehyde.Splash goggles. Full suit. Boots. Gloves. No respiratory protection should be needed. Please note that these precautions are for room temperature handling without aerosol/spray application. Use at elevated temperature or aerosol/spray applications may require added precautions. For further information regarding aerosol inhalation toxicity, please refer to the guidance document regarding the use of silicone-based materials in aerosol applications that has been developed by the silicone industry (www.sehsc.com). Coments: When heated to temperatures above 150 deg. C in the presence of air, this product can form formaldehyde vapors. Formaldehyde is a potenetial cancer hazard, a known skin and respiratory sensitizer, and an irritant to the eyes, nose, throat, skin, and digestive system. Safe handling conditions may be maintained by keeping vapor concentrations within the OSHA Permissible Limit for formaldehyde.Not available.
Liquid.Odorless.Not available.Not available.Colorless.Not available.>65°C (149°F)Not available.Not available.0.97 (Water = 1)Not available.Not available.Not available.Not available.Not available.Not available.Not available.Not available.
The product is stable.Not available.Excess heat, incompatible materialsReactive with oxidizing agents.Not available.Not available.Not available.Will not occur.
Contact with skin. Eye contact.Acute oral toxicity (LD): >10000 mg/kg [Guinea pig].Not available.Slightly hazardous in case of skin contact (irritant), of ingestion. Non-hazardous in case of inhalation.Other Lethal Dose/Conc: LC [Rabbit] - Route: Inhalation; Dose: >978000 mg/kg/7.5HNot available.Acute Potential Health Effects: Skin: May cause skin irritation. However, no significant irritation is expected from a single short-term exposure. Eyes: Direct contact may cause irritation with temporary redness and discomfort. Inhalation: No significant effects expected from a single short-term exposure. Ingestion: Low ingestion hazard in normal use.
Not available.Not available.Possibly hazardous short term degradation products are not likely. However, long term degradation products may arise.Not available.Not available.
Waste must be disposed of in accordance with federal, state and local environmental control regulations.
Not a DOT controlled material (United States).Not applicable.Not applicable.
TSCA 8(b) inventory: Listed as Dimethyl Silicones and Siloxanes (CAS no. 63148-62-9) TSCA 8(a) PAIR: Listed as Dimethyl Silicones and Siloxanes (CAS no. 63148-62-9) TSCA 8(d) H and S data reporting: Listed as Dimethyl Silicones and Siloxanes (CAS no. 63148-62-9): Effective Date: 10/12/93; Sunset Date: 6/30/98Not available.Not controlled under WHMIS (Canada).This product is not classified according to the EU regulations. Not applicable.110g010Gloves. Lab coat. Safety glasses.
Not available.Not available.
 XSLT Exec: export JAVA_HOME=/usr/lib/jvm/jre; $JAVA_HOME/bin/java -classpath /usr/share/java:/usr/share/java/xalan-j2.jar:/usr/share/java/xerces-j2.jar org.apache.xalan.xslt.Process -IN /var/www/vhosts/sciencelab.com/httpdocs/phproot/msds_cache/msds-9924927 -XSL /var/www/vhosts/sciencelab.com/httpdocs/phproot/xsl/msdsfo.xsl -OUT /var/www/vhosts/sciencelab.com/httpdocs/phproot/msds_cache/msds-9924927.fo 2>&1 XSLT Result: MD5 Result: 6fc025c34bcad83e57d725ad603658e3 FOP Result: Updating checksum... Opening PDF file...